-
How to Make a Bootable DVD for Installing Cisco UC Products
Lately, I’ve been asked a lot about how to make a bootable disk for a Cisco Unified Communication Manager installation for a lab or test environment. This is quite easy to do, and the procedure has been repeatedly described in various sources. In my lab I use the method described here: http://htluo.blogspot.com/2010/04/how-to-make-non-bootable-iso-image.html IMPORTANT! This method…
-
UCCX 10.5 Client Configuration Tool Error
Good morning, Yesterday I had an issue with CAD installation for UCCX 10.5. As you know before installing CAD on Windows PC it is necessary to run Client Configuration Tool. However, when we run it on Windows 7 PC, we received an error “Default entry: Awaiting return value from uploader.exe” and the execution of Client…
-
Calling Number on Agent’s Phone Display (UCCX)
Hi all, A few days ago I answered a question from a reader of the blog regarding the problem of displaying Caller ID on UCCX agent’s phone. The problem was like that: at the time of an incoming call to the agent, its Cisco Agent Desktop (CAD) displays the correct Calling number of the caller;…
-
Ringback Tone Instead of MOH When Making Call to an Agent (UCCX)
Hello friends, Today we talk about a scenario for you UCCX, which implements the ability to send the ringback tone to the caller when the call is sent to the agent, and the agent’s phone rings. The problem is that when a call is sent to an agent, in fact, CUCM performs a call transfer,…
-
Dropping Conference in CUCME When Initiator Disconnects
Hello all! This post is a response to a question from a student of my recent CVOICE course. The question was as follows – how to drop a hardware Conference in CUCME when initiator of the Conference is leaving the session. The solution is easy. In ephone or ephone-template configuration just add a command conference drop-mode. Its syntax is: conference drop-mode [creator | local]…
-
Presence for Сall Manager Express
Hi folks, Today we are talking about how to set up Presence feature on the CUCME (Call Manager Express). Presence allows a user (watcher) to monitor the real-time status of another user at a directory number or SIP URI from the device of the watcher. Before making a call, one can visually see whether the other…
-
Profile Photos for CUPC / Jabber
Good afternoon, In my newpost, I want to talk about how to add user avatars (profile photos) for CUPC or Jabber centrally. Using these communicators becomes much more interesting and more convenient if we visually see a photo of our contact. But not everyone knows how to make avatars to be displayed on your device.…
-
CUCM Call Routing Based on Calling Number
Good day, Today’s post will focus on the subject, which have been increasingly interested in by my students and blog readers. We will talk about how to route the call in CUCM depending on the calling number. This problem arises, typically, in situations where you want to block incoming calls from certain numbers, or, vise…
-
Checking the status of component processes in UCCE 9.0
Good afternoon, In previous versions (up to 8.5) of the Cisco Contact Center Enterprise (UCCE), the status of all running processes related to the operation of installed and activated system components, such as Router, Logger, PG, CTI Server, CTI OS, could be seen in the Windows server’s taskbar. This made it easy and quick to…
-
A sample prompt recording script for UCCX
Good morning! As you know, scripting for UCCX or Cisco IP IVR always requires some pre-recorded wav files. These are all kinds of greetings, instructions for performing certain actions, voice menus, etc. Typically, these wav files are recorded with an external sound editor and then uploaded to the UCCX / IP IVR repository. However, you…
-
Problem with recording agent conversations on UCCX 9.0
Good evening! The last week I delivered UCCXD 4.0 Cisco course. In the topology, I decided to replace UCCX 8.0 with 9.0.2. Actually, there were no special problems with the new version, however, on the course, we suddenly encountered the problem that the recording of agent conversations initiated from the supervisor desktops or from the…
-
CUCM SIP-trunk to ITSP (via CUBE) basic configuration
Good day, Many of my readers and students are very interested in the topic of how to connect their CUCM to IP telephony service provider via SIP-trunk. This topic is very relevant, as more and more providers offer SIP services and connections, in addition to traditional E1 or BRI lines. This post will discuss the basic settings…
-
Firmware Upgrade for Cisco IP Phones (CUCM)
Good morning! I wanted to write this post long ago, however I was extremely busy and did not get around to take the required screenshots. And when preparing for the next course, I had to upgrade the firmware on our lab phones. So it became possible to write about what needs to be done on…
-
CUCM 9.0 – How to install licenses
Hello! Today we’ll talk about how licenses for CUCM 9.0 are installed. Since the process in the new version differs significantly from earlier predecessors, I will give the entire installation procedure with screenshots taken from our lab CUCM. So, the first difference of the 9th versions of CUCM is that there are no more “free”…
-
CUCM 9.0 – Pause when dialing a number with the Speed Dials keys.
Good morning! The festive New Year’s fireworks have died down, and working days are coming again. 🙂 I decided to start 2013 with a small article devoted to the problem of inserting a pause in extension dialing when calling from CUCM to, for example, your PSTN. Quite often, on various forums, the question was discussed…
-
A command to synchronize the E1 link on Huawei voice gateways
Good afternoon, A few days ago, one of the readers of my blog, Alexander Bakulin, asked me what command is used to synchronize E1 links on Huawei voice gateways. I could not answer this question, because I do not work with the Chinese devices, and advised Alexander to google. He found the answer to it…
-
Unsuccessful call to the PSTN via the Cisco 5400 (H323) gateway due to incoming dial-peer 0
Good afternoon, Today I happened to be convinced once again in practice how it is important to understand the principles of call routing in Cisco voice gateways. One of my students had the following problem: he was performing a new installation of CUCM at a customer side and then connecting the CUCM to the PSTM…
-
Cause 127 Cisco VGW – Huawei VGW (H323)
Hello, Last week, I helped two followers of my blog to solve a problem with an H323 connection between a Cisco Voice Gateway and a Huawei Voice Gateway. The topologies of both networks were as follows: PBX1 (E1) -> E1 Cisco -> H323 -> Huawei E1 -> (E1) PBX2 The problem was this one: when…
-
Virtual Machine Settings for Cisco UC Products
Hello, Since more and more virtualization is being used in real projects, my students are increasingly asking me questions like: “What should be the parameters of virtual machines to install CUCM, CUC, UCCX?” The answer to this question is given by the vendor itself: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/cisco-collaboration-virtualization.html Here you can also find templates for virtual machines (ova…
-
Examples of the simplest CUCME configuration for beginners
Good morning! For those who are taking their first steps in the world of VoIP and learning how to configure Call Manager Express (CUCME), I think the following link will be helpful. The document provides examples of the simplest configuration of SCCP and SIP phones for registration on CME: http://www.i-1.nl/blog/wp-content/uploads/CUCME-cheatsheet-1.0.pdf As you can see, everything…